The iControl Thermostat provides a money-saving and convenient way to enable you to monitor and control the temperature in your house, both heating and cooling. From your iControl web page, you can both set temperatures to automatically turn up or turn down heating and air conditioning and change those settings for special situations.

The iControl Thermostat communicates wirelessly with the iControl box through a simple wire antenna that is attached to the back of the thermostat. The iControl box, in turn, communicates with iControl's servers allowing you to view and set heating and cooling levels.

Installation only requires a screwdriver. Power is obtained from your heating/cooling system via the existing wiring. The thermostat provides heating and cooling set point functionality. For example, the high limit (Cooling Set Point) can be set to 80° F, it prevents the air conditioner from turning on until the temperature exceeds 80° F. If the Thermostat's low limit (Heating Set Point) is set to 60° F, it prevents the heat from turning on until the temperature drops below 60° F.

What's Included:
Mounting Screws
Installation Guide

All iControl products will be available later this year. To receive notification of their availability for purchase, click here, or the “Notify Me” button found on this page.

• Displays current temperature on LED display.
• One touch control to display high and low set point temperatures.
• Controls both heat and air conditioning.
• Provides set points for high and low temperature.
• Thermostat's low and high range is 51° to 91°F.
• Thermostat continues to control the heating/cooling system even if the security system fails or is disabled.
• Can be operated independently of the iControl box.
• Designed for use with standard 24 VAC control of single stage heating/ cooling systems.
• Designed to also work with two-stage heating/cooling systems that can be controlled by a single-stage thermostat.

• Wall mounted

Dimensions:
Height: 137 mm (5.4”)
Width: 91 mm (3.6”)
Depth; 31 mm (1.2”)